Dental Laboratories Metal Alloys Centifuge Casting Apparatus Machine

• Customization: Available
• Applicable Departments: Dental Laboratory
• Certification: CE
• Model NO.: JG-214
• Type: Dental Lab Centifuge Casting Machine
• Material: Metal
• Quality Certification: CE
• Speed: 7000rpm
• Net Weight: 5.5kg
• Packing Size: 40X23X23cm
• Transport Package: Cardboard Box
• Specification: 39*18*28cm
• Trademark: JINGUANG
• Origin: China
• HS Code: 9018499000
• Production Capacity: 3, 000 Units/Monthly

Product Description

Dental Laboratories Metal Alloys Centifuge Casting Apparatus Machine

This centrifugal casting machine is indispensable for the production of high quality oral restorations. Durable and reliable, our casting apparatus easily handles most alloys with high melting-points that are used by dentists.

Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs.

  

Product size:	39x18x28cm
Packing size:	40x23x23cm
Weight:	6kg
Maximum rotation diameter:	360mm
Maximum spring torque:	150N
Maximum eccentric weight:	1.25kg
Maximum mold diameter:	78mm

Features

  The metal weight can be rotated out and                          Maximum mold diameter: 78mm                                   Centrifugal casting spring
           in to adjust the balance

 

            3 cradles (large, medium, small): For mold placement                                       Long handle tongs: Used to transfer crucible or mold,
                                                                                                                                                                       38.5cm long






 

Usage

The centrifuge uses the elastic force of metal spring to drive the horizontal bar to rotate through the central shaft to generate centrifugal force. One end of the horizontal bar is provided with a crucible and a support for fixing the mold, and the other end is equipped with a metal mound for balancing. Before casting, loosen the central screw on the horizontal bar and fix a mold on the bracket. After adjusting the balance, tighten the screw and remove the mold. Then rotate the horizontal rod clockwise for about 3-5 turns to tighten the spring, and then lift the jack post to fix the horizontal bar temporarily. During casting, the casting alloy is placed in the crucible, and then the roasted mold is fixed on the bracket. The opening of the casting mold is facing the crucible hole. The device with flame is used to heat the casting gold, and the alloy is fully melted. At this time, the left hand supports the metal mound of the horizontal bar, and gently moves the horizontal bar to make the kilogram column fall down. At the same time, the flame is turned away. Due to the spring force of the horizontal bar, it rapidly rotates in the counter clockwise direction, and the molten gold in the crucible is thrown into the mold cavity under the action of centrifugal force to complete the casting.

 

Notice

Pay attention to the table is fixed firmly and the crucible is placed correctly. The working table must be equipped with good protection device to prevent molten metal from splashing out during operation, which may harm human body. During operation, pay attention to the inertia of spring tightening, and strictly prevent hand smashing. Keep the equipment clean and dry, clean the equipment and remove the residue after casting.